 |
 |
The PneuAir range of cylinders offers a complete and cost effective selection of linear actuators that conform to international standards. With bore sizes ranging from 8mm to 200mm and available in stainless steel as an option up to 100mm bore, we have a cylinder available for every application.
Product Range
HE Cylinder
 |
Pneumatic Cylinder, Ø 8-25mm, Single Acting conforms to DIN ISO 6432 |
 |
Design and function
Single acting pneumatic cylinder with built in cushion rings. |
| Order No |
HE-08-... |
HE-10-... |
HE-12-... |
HE-16-... |
HE-20-... |
HE-25-... |
| Piston-Ø mm |
8 |
10 |
12 |
16 |
20 |
25 |
| Connection |
M5 |
M5 |
M5 |
M5 |
G 1/8 |
G 1/8 |
| Piston Rod Thread |
M4 |
M4 |
M6 |
M6 |
M8 |
M10 x 1.25 |
| Operating Pressure |
2 ... 10 bar (29 ... 145 psi) |
| Temperature Range |
-30 °C ... +80 °C (-22 °F ... +176 °F) |
| Medium |
filtered/non-lubricated or filtered/lubricated air |
| Std Stroke Lengths 1) |
10, 25, 50, max. 50 |
| Materials |
| Cylinder Tube: |
Stainless Steel |
| End Caps: |
Aluminium (Anodised) |
| Piston Rod: |
Stainless Steel |
| Seals: |
Polyurethane |
|
|
1)=refer to critical load diagram in catalogue to determine critical values on piston rod |
Click here for more HE Cylinder information |
|
HM Cylinder
 |
HM Cylinder - standard cylinder
HMDE - with double piston rod
HMP - with adjustable cushions
HMPDE - with double piston rod & adjustable cushions
|
|
Pneumatic Cylinder, Ø 8-63mm, Double Acting with Magnetic Piston
conforms to DIN ISO 6432 |
|
Design and function
Double acting pneumatic cylinder with permanent magnet and built in cushioning rings or adjustable cushions.
Standard stroke lengths are given in the table below, additional lengths are available on request. |
| Order No |
HM-08-... |
HM-10-... |
HM-12-... |
HM-16-... |
HM-20-... |
HM-25-... |
HM-32-... |
HM-40-... |
HM-50-... |
HM-63-... |
| Piston-Ø mm |
8 |
10 |
12 |
16 |
20 |
25 |
32 |
40 |
50 |
63 |
| Force at 6 bar in Newtons 1) |
EXT |
25 |
40 |
60 |
105 |
170 |
265 |
430 |
680 |
1060 |
1680 |
RET |
20 |
35 |
45 |
90 |
140 |
220 |
370 |
570 |
890 |
1510 |
| Connection |
M5 |
M5 |
M5 |
M5 |
G 1/8 |
G 1/8 |
G 1/8 |
G 1/4 |
G 1/4 |
G 3/8 |
| Piston Rod Thread |
M4 |
M4 |
M6 |
M6 |
M8 |
M10 x 1.25 |
M10 |
M12 |
M16 |
M16 |
| Cushion Length mm 2) |
- |
- |
- |
15.5 |
17 |
19.5 |
22.5 |
24.5 |
29.5 |
29.5 |
| Operating Pressure |
1 ... 10 bar (14.5 ... 145 psi) |
| Temperature Range |
-30 °C ... +80 °C (-22 °F ... +176 °F) |
| Medium |
filtered/non-lubricated or filtered/lubricated air |
| Std Stroke Lengths mm 3) |
| Ø8 ... 10 |
10, 25, 40, 50, 80, 100, max. 100 |
| Ø12 ... 16 |
10, 25, 40, 50, 80, 100, 125, 160, 200, max. 200 |
| Ø20 |
10, 25, 40, 50, 80, 100, 125, 160, 200, 250, 320, max. 320 |
| Ø25 |
10, 25, 40, 50, 80, 100, 125, 160, 200, 250, 320, 500 max. 500 |
| Ø32 ... 63 |
10, 25, 40, 50, 80, 100, 125, 160, 200, 250, 320, max. 900 |
|
| Materials |
| Cylinder Tube: |
Stainless Steel |
| End Caps: |
Aluminium (Anodised) |
| Piston Rod: |
Stainless Steel |
| Seals: |
Polyurethane |
|
|
1)=The internal friction is considered
2)=for series HMP & HMPDE only
3)=refer to critical load diagram in catalogue to determine critical values on piston rod |
Click here for more HM Cylinder information |
|
XL Cylinder
 |
Pneumatic Cylinder, Ø 32-125mm, Double Acting with Magnetic Piston
conforms to DIN ISO 6431/VDMA 24562 |
|
Design and function
Double acting Al-profile pneumatic cylinder with integrated sensor grooves, adjustable cushions and permanent magnet for proximity sensors.
The sensors can be installed directly into the sensor grooves of the Al-profile.
Standard stroke lengths are given in the table below, additional lengths are available on request. |
| Order No |
XL-032-... |
XL-040-... |
XL-050-... |
XL-063-... |
XL-080-... |
XL-100-... |
XL-125-... |
| Piston-Ø mm |
32 |
40 |
50 |
63 |
80 |
100 |
125 |
| Connection |
G 1/8 |
G 1/4 |
G 1/4 |
G 3/8 |
G 3/8 |
G 1/2 |
G 1/2 |
| Piston Rod Thread |
M10 x 1.25 |
M12 x 1.25 |
M16 x 1.5 |
M16 x 1.5 |
M20 x 1.5 |
M20 x 1.5 |
M27 x 2 |
| Cushion Length mm |
27 |
29 |
32 |
32 |
32 |
32 |
44 |
| Operating Pressure |
1 ... 10 bar (14.5 ... 145 psi) |
| Medium |
filtered/non-lubricated or filtered/lubricated air |
| Std Stroke Lengths mm 1) |
25, 40, 50, 80, 100, 125, 160, 200, 250, 320, 400 max. 2800 |
| Materials |
| Cylinder Tube: |
Aluminium Profile (Anodised) |
| End Caps: |
Die Cast Aluminium (Painted) |
| Piston Rod: |
Chromium Plated Steel (Standard) - Stainless Steel (Optional) |
| Seals: |
Polyurethane/NBR |
|
|
1)=refer to critical load diagram in catalogue to determine critical values on piston rod |
Click here for more XL Cylinder information |
|
XG Cylinder
 |
Pneumatic Cylinder, Ø 160 & 200mm, Double Acting with Adjustable Cushions
conforms to DIN ISO 6431/VDMA 24562 |
|
Design and function
Double acting pneumatic cylinder with adjustable cushions.
Standard stroke lengths are given in the table below, additional lengths are available on request. |
| Order No |
XG-160-... |
XG-200-... |
| Piston-Ø mm |
160 |
200 |
| Force at 6 bar in Newtons 1) |
EXT |
10860 |
16960 |
RET |
10180 |
16280 |
| Connection |
G 3/4 |
G 3/4 |
| Piston Rod Thread |
M36 x 2 |
M36 x 2 |
| Cushion Length mm |
50 |
50 |
| Operating Pressure |
1 ... 10 bar (14.5 ... 145 psi) |
| Temperature Range |
-20 °C ... +80 °C (-4 °F ... +176 °F) |
| Medium |
filtered/non-lubricated or filtered/lubricated air .
If speeds exceed 1 m/s (3.3ft/s) lubricated air is recommended. |
| Std Stroke Lengths mm 2) |
25, 50, 80, 100, 125, 160, 200, 250, 320, 350, 400, 500, 600, 700, 800, 900, 1000, max. 2500 |
| Materials |
| Cylinder Tube: |
Aluminium (Anodised) |
| End Caps: |
Die Cast Aluminium (Painted) |
| Piston Rod: |
Chromium Plated Steel (Std) - Stainless Steel (Opt) |
| Seals: |
Polyurethane/NBR |
|
|
1)=The internal friction is considered
2)=refer to critical load diagram in catalogue to determine critical values on piston rod |
Click here for more XG Cylinder information |
|
|
|
